One day you open the Wi-Fi settings on your phone and see small text under your home network's name: Weak Security on an iPhone, or a message along the lines of "this network uses an older security protocol" on some Android phones. Yet the internet works normally and nothing has changed.

The message understandably causes worry. The good news is that its meaning is fairly narrow, the cause is almost always a single router setting, and fixing it is not complicated.

What the warning means

The phone is not detecting an attack. When it scans for networks, it reads the information the router broadcasts, including the type of security in use. If that type is one now considered outdated, the phone attaches a warning label.

On an iPhone, tapping the network name usually shows a short explanation that this security type is no longer considered secure, along with a suggestion to set the router to WPA2 (AES) or WPA3. Android wording varies by brand and version, but the meaning is the same.

So the warning assesses the router, not your phone. Other devices on the same network are in the same position, they just do not all tell you about it.

The settings that trigger it

Several settings cause this label to appear. The option names on routers vary a little, but the key words are easy to recognise.

  • WEP. The oldest standard, breakable within minutes for more than fifteen years now.
  • WPA (first generation). A stopgap replacement for WEP that uses TKIP encryption. Not recommended for a long time.
  • WPA2 with TKIP. It says WPA2, but the encryption is still TKIP. This one is often missed because people only look at the WPA2 label.
  • WPA/WPA2 or TKIP+AES mixed mode. This option exists so that very old devices can still connect. As a result the router keeps advertising TKIP support, and the part of the traffic sent to all devices at once also uses TKIP. Modern phones still flag it as weak.
  • Open networks. No password at all. Usually given a separate label as unsecured or no security rather than Weak Security, but the problem is of the same kind.

A short comparison looks like this:

Security modeStatusRecommendation
Open (no password)Not encryptedPublic places only, never at home
WEPBroken, easy to crackDo not use
WPA (TKIP)ObsoleteDo not use
WPA2-TKIP or WPA/WPA2 mixedObsolete, triggers the warningSwitch to WPA2-AES
WPA2-AES (CCMP)Still adequateMinimum standard for a home
WPA2/WPA3 mixedGoodSafest choice when older devices are present
WPA3-Personal (SAE)Best currently availableUse if every device supports it

The difference between WPA2 and WPA3 itself is covered in more detail in the guide to WPA2 vs WPA3.

How serious the risk is

First, what it does not mean. The warning is not a sign that someone has got into your network, not a sign that your phone has a virus, and not a sign that your Wi-Fi password has leaked.

What it does mean: the network uses weaker encryption than it should. How serious that is depends on the type.

  • WEP is genuinely dangerous. Someone near your home with easily obtained tools can recover the key, then use your internet and see any traffic that is not separately encrypted.
  • TKIP is not as easy to break as WEP, but it has known weaknesses that are no longer being fixed. The Wi-Fi standard declared it obsolete long ago.
  • Open networks mean traffic between the phone and the router is not encrypted at all at the Wi-Fi level.

To balance that, most sites and apps now use HTTPS, so the content of messages, account passwords, and transactions remain encrypted in their own right even when Wi-Fi security is weak. The remaining risks are mostly other people using your network, snooping on other devices on the local network, and information about which sites you visit.

There is also a side effect people rarely notice: TKIP limits speed. Wi-Fi 4 (802.11n) and later require AES for their higher speeds. A router still using TKIP often holds devices to around 54 Mbps, so fixing this setting sometimes makes Wi-Fi feel faster as well.

Why ISP routers are often set this way

Many homes in Indonesia use the ONT supplied by their internet provider, commonly made by ZTE, Huawei, or Fiberhome. Some units ship with WPA/WPA2 mixed security or TKIP+AES encryption.

The reason is practical rather than careless installation: mixed settings make sure almost every device, including very old ones, can connect straight away without complaints. For a provider installing thousands of units, fewer support calls matter more than the strictest possible settings.

Older ONT firmware sometimes does not offer WPA3 at all. That is fine, WPA2-AES is enough to clear the warning and gives adequate protection.

How to fix it on your own router

If the router is yours, or you have its admin access, the steps are as follows. Every brand's interface differs, so menu names are described in general terms.

  1. Log in to the router's admin page. Usually through an address such as 192.168.1.1 or 192.168.100.1 in a browser. How to do that is in the guide to accessing the router admin page.
  2. Find the Wi-Fi security settings. Usually under a menu such as Wireless, WLAN, or Network, then a Security section. On dual-band routers the 2.4 GHz and 5 GHz settings may be separate, so check both.
  3. Choose the security mode. In order of preference: WPA3-Personal if every device supports it, WPA2/WPA3 mixed if there are older devices, or WPA2-PSK if the router does not offer WPA3. Avoid options that say WPA alone, WPA/WPA2, or WEP.
  4. Choose AES encryption. If there is a separate field called Encryption or Cipher, choose AES (sometimes written as CCMP). Do not choose TKIP or TKIP+AES.
  5. Save and wait. The router usually disconnects every device briefly. Reconnect the phone and the warning should be gone. If it still appears, forget the network on the phone and connect again.

While you are on that page, check two other things: a Wi-Fi password that is long enough (at least twelve random characters) and WPS, which is best turned off if you do not use it.

Where the setting is on common ONTs

Menu names can shift a little between firmware versions, but on the ONTs Indonesian providers install most often, the location is roughly as follows:

ONTUsual addressWhere the security setting isWhat to watch for
ZTE F609192.168.1.1Network, WLAN, then Security2.4 GHz only, and older firmware often does not offer WPA3 yet
ZTE F670L, F660192.168.1.1Network, WLAN, then SecurityCheck the settings for each band and each SSID, including extra SSIDs
Huawei HG8245H, HG8145V5192.168.100.1, some units 192.168.1.1Advanced Configuration, WLAN, then WLAN Basic ConfigurationThe authentication and encryption modes are usually on the same page as the Wi-Fi password
Fiberhome HG6243C, HG6145F192.168.1.1Usually under Network or WLAN SettingsFind the encryption field and make sure AES is selected

On all of these ONTs, the options that trigger the warning are usually obvious from their names: anything containing TKIP, or WPA/WPA2 without AES specified.

If the provider has locked the ONT

If you have no admin access, or the security menu does not appear on the customer account, ask the provider to change it. It is a reasonable request. IndiHome customers can go through 188 or the MyTelkomsel app, Biznet customers through Biznet Home Care on 1500933, and other providers through the number or app shown on the bill. To avoid misunderstanding, make the request specific, for example (in Indonesian, for the agent):

Mohon ubah mode keamanan Wi-Fi di ONT saya ke WPA2-PSK
dengan enkripsi AES saja (bukan TKIP atau TKIP+AES),
untuk semua SSID di 2,4 GHz dan 5 GHz. Kata sandi tidak perlu diubah.

That is: switch the ONT's Wi-Fi security to WPA2-PSK with AES only, for every SSID on both bands, without changing the password. The last sentence matters. Without it, the agent sometimes changes the password too, and every device in the house has to be reconnected.

How to confirm the change worked

The label disappearing from your phone is already a good sign, but a few things are worth checking so nothing gets missed.

  • Check every network name. Dual-band routers often broadcast two names, for example one for 2.4 GHz and one for 5 GHz. Make sure both use AES, not just the one your phone happens to be on.
  • Check the guest network. If the router has an active guest network, its security settings are separate and may still be on TKIP.
  • Reconnect other devices. Laptops, TVs, and smart devices usually reconnect on their own. One that refuses is a sign it only supports older encryption, covered in the next section.
  • Make a note of the settings. After the ONT is reset to factory settings or replaced by a technician, the security mode can revert to its default. If the warning comes back one day, that is almost certainly why.

When an older device will not connect

After TKIP is turned off, the occasional device can no longer connect. Usually it is something very old: an old printer, an early cheap camera, an old games console, or a smart device that has never been updated.

The options, from most to least recommended:

  • Check for a firmware update for that device. Some devices gain AES support through an update.
  • Move it to a LAN cable if it has a network port. The Wi-Fi encryption problem disappears entirely.
  • Create a separate network just for older devices. Many routers support a guest network or an extra SSID with its own security settings. The main network stays on AES, and older devices go on a separate network that should ideally be isolated from everything else. How to do this is in the guide to guest networks on a home router.
  • Consider replacing the device. A device that only supports WEP is generally too old to keep on a home network.

What you should not do is switch the whole network back to mixed mode for the sake of one old device. That lowers protection for every other device.

Example: a ZTE F670L ONT and an old CCTV camera

A household uses a ZTE F670L ONT with two network names, one on 2.4 GHz and one on 5 GHz. The occupants' iPhones show Weak Security on both. Both turn out to be set to WPA/WPA2 with TKIP+AES.

  1. Both SSIDs are changed to WPA2-PSK with AES. The warning disappears on every phone, and the laptops and TV reconnect on their own.
  2. One cheap CCTV camera on the porch refuses to reconnect. No firmware update is available from its app.
  3. An extra 2.4 GHz SSID is switched on just for that camera, with a different password. The occupants' phones are never connected to that SSID.

The result: the main network is free of warnings. The warning only appears for the networks you open on your phone, so the camera-only SSID does not get in the way of daily use. Plan to replace that camera when you get the chance, because a device that no longer receives updates usually has other holes besides its Wi-Fi encryption.

When the network is not yours

At a cafe, hotel, or office you cannot change the router settings, so the warning will stay. What you can do is adjust how you use the network:

  • Make sure the sites you open use HTTPS, and do not ignore certificate warnings in the browser.
  • Put off logging in to important accounts or making transactions if it is not urgent, or use mobile data for those.
  • Consider a trustworthy VPN if you often work from public Wi-Fi, the considerations are in the guide to VPNs for public Wi-Fi.
  • Turn off file sharing and auto-join for that network when you are done.

In a boarding house (kos) or rented home, the situation sits in between. The network is not yours, but you use it every day. Show the warning to the owner or manager, along with the request message for the provider above. The change takes only a few minutes and benefits every resident.

Other useful habits for public places are in the guide to using public Wi-Fi safely.

Do not confuse it with the Privacy Warning

The iPhone has another warning that appears in the same place: Privacy Warning. It is something entirely different. It appears when the private Wi-Fi address feature is turned off for that network, so the phone uses its real MAC address, which is easier to track from one network to another. Android has a similar feature under names such as randomised MAC.

The Privacy Warning has nothing to do with the router's encryption, and clearing it is just a matter of turning the private address feature back on in that network's settings.

In short: Weak Security means the router uses old encryption. At home, switch to WPA2-AES or WPA2/WPA3, turn off TKIP, and move devices that are too old onto a separate network. On someone else's network, just be more careful about what you open.

Frequently asked questions

Does the Weak Security warning mean my phone has been hacked?

No. The warning only assesses the type of security the router uses, not the state of your phone. It means the network uses an older encryption method that is easier to break than today's standard, not that someone has got in.

Which router settings trigger this warning?

Most often WPA2 with TKIP, WPA/WPA2 mixed mode with TKIP+AES, first-generation WPA, and WEP. Networks with no password at all are usually given a separate label as unsecured.

How do I get rid of the Weak Security warning?

Open the router's admin page, go to the Wi-Fi security settings, and choose WPA2-PSK with AES encryption, WPA2/WPA3 mixed mode, or WPA3 if all your devices support it. Save, then reconnect the phone. If the network is not yours, the warning cannot be removed from the phone's side.

How is it different from the Privacy Warning on iPhone?

The Privacy Warning appears when the private Wi-Fi address feature is turned off for a particular network, so the phone uses its real MAC address. That is about device tracking and has nothing to do with the router's encryption.