You pick a Wi-Fi network, type the password, and the phone shows Authentication error or Authentication problem on Android. On an iPhone the message is usually Incorrect password or Unable to join the network. Sometimes the phone retries a few times, then the network goes back to Saved without connecting.
This message is much narrower than a general "cannot connect" complaint, so the list of causes is shorter too. If your symptom is different, for example the network does not appear or it connects without internet, start with the guide to Wi-Fi that will not connect.
What the message means
Before the phone is allowed onto the network, the phone and the router run a short exchange called the 4-way handshake (on WPA2) or an SAE exchange (on WPA3). The password is never sent as is. Both sides derive a key from their own copy of the password and prove to each other that the results match.
If they do not match, the router ends the connection and the phone reports an authentication error. At this stage the phone has no IP address and has not touched the internet at all, so an outage at your internet provider is not the cause.
Keep in mind that the phone does not always know why it was refused. A router that rejects a device for another reason, such as a block, sometimes just drops it midway, and the phone reports that as a password problem. That is why this message sometimes appears even when the password is right.
Causes, most common first
- The password really is wrong. Wi-Fi passwords are case sensitive. Phone keyboards often capitalise the first letter automatically, the number 0 gets confused with the letter O, the letter l with the number 1, and a trailing space comes along when the password is pasted from a message.
- The password was just changed on the router. A phone holding the old password keeps trying it and keeps failing.
- The saved network profile is stale. Besides the password, the phone stores the network's security type. If the router moved from WPA2 to WPA3 or back, the old profile may not match even though the name and password are the same.
- Security mode mismatch. Older phones generally do not support WPA3. If the router is set to WPA3 only, those phones cannot get in. WPA2/WPA3 mixed mode is designed to solve this, but some older devices still have trouble with it.
- The phone is blocked on the router. MAC filtering, a block list, or parental control features can refuse specific devices. On some phones that refusal appears as an authentication error.
- Random MAC address meets MAC filtering. Modern phones use a random MAC address per network. If the router only allows registered addresses, a phone with a random address looks like an unknown device.
- The router is full or stuck. A router that has hit its device limit or has hung sometimes refuses new connections. The message can be an authentication error, although more often the phone spins for a long time at the obtaining IP address stage.
- One name for 2.4 GHz and 5 GHz. If both bands share a name but have different security settings or passwords, the phone can succeed on one band and fail on the other.
- Office or campus Wi-Fi (Enterprise). WPA2/WPA3-Enterprise networks ask for a username, an account password, and sometimes a certificate. Filling it in like home Wi-Fi will always fail.
Steps to fix it, easiest first
- Forget the network, then reconnect. Open Settings > Wi-Fi, tap the network name, choose Forget, then select the network again and type the password. This throws away the old profile and the old password together.
- Show the password while typing. Almost every phone has an eye icon or a Show password option in the field. Check capital letters, spaces, and look-alike characters. If the password is saved on another device, how to find it is in the guide to viewing saved Wi-Fi passwords.
- Restart the phone and the router. Turn the router off for about half a minute and back on, and restart the phone. This clears a stuck or full router.
- Try another device. Connect another phone or laptop with the same password. The result tells you whether to look at the router or the phone.
- Turn off the random MAC address for this network if the router uses MAC filtering or a device list. The setting is in the network details, usually under a name such as Privacy, Private Wi-Fi address, or MAC type.
- Change the router's security mode to WPA2/WPA3 mixed or WPA2-AES if the failing phone is an older model and the router is set to WPA3 only.
- Turn MAC filtering off temporarily to make sure the phone is not being blocked. If the phone gets in straight away, add its address to the allow list and turn the filter back on.
- Update the router firmware if a new version is available, especially if the problem started after the phone received a system update.
- Reset network settings on the phone as the last resort. Every saved Wi-Fi network, Bluetooth device, and VPN is deleted along with it.
Symptom, cause, and fix table
| Symptom | Likely cause | Fix |
|---|---|---|
| Fails on every device | Wrong or changed password | Check the password on the router admin page, retype it with Show password |
| Used to work, now fails on one phone | Stale saved profile | Forget the network and reconnect |
| New phones work, an old phone fails | Router set to WPA3 only | Switch to WPA2/WPA3 mixed or WPA2-AES |
| Fails after a phone update | Random MAC address and MAC filtering | Turn off random MAC for this network or register the new address |
| One particular device is always refused | Device blocked on the router | Check the block list, MAC filter, and parental controls |
| New devices refused, existing ones keep working | Router full or stuck | Restart the router, remove devices you do not use |
| Works near the router, fails in another room | 2.4 GHz and 5 GHz have different settings | Match security and password on both bands, or give them separate names |
| Office Wi-Fi asks for an identity | Enterprise network | Ask the network administrator for the EAP method, account, and certificate |
Is it the router or the phone?
Testing with a second device is the quickest way to tell them apart.
- Every device fails: the problem is the password or the router. Log in to the router admin page, look up the current password, and check the security mode. If you cannot get into the admin page at all, a factory reset is the last option.
- Only one phone fails: focus on that phone. Forget the network, check the random MAC address, and make sure the phone supports the router's security mode.
- It started failing after a phone system update: that pattern has its own causes, covered in the guide to a phone that will not connect to Wi-Fi after an update.
WPA3 and older phones
WPA3 uses a stronger way of checking the password, but only newer devices support it. A router set to WPA3 only will refuse a phone that only knows WPA2, and the message shown is often an authentication error.
WPA2/WPA3 mixed mode lets each device use the best option it supports. If an older phone still fails in mixed mode, the next safe choice is WPA2 with AES encryption. The full comparison is in the guide to WPA2 vs WPA3.
MAC filtering and random addresses
MAC filtering only allows devices whose address is registered. The catch is that phones now use a random address per network by default, and some phones can even change that address periodically. The address you registered last month may not be the one the phone uses today.
If you still want MAC filtering, turn off the random address for your home network only, then register the address shown in the phone's network details. Whether the filter is worth the hassle is discussed in the guide to whether MAC filtering is useful.
Office, campus, and Enterprise Wi-Fi
If the phone asks for fields such as EAP method, Identity, or CA certificate, the network uses Enterprise mode. Each user signs in with their own account rather than a shared password.
The correct settings are decided by the network administrator, so ask for the EAP method, how the certificate should be validated, and the domain to enter. Guessing, and especially choosing not to validate the certificate, can send your account details to a fake network imitating the office network's name.
A note for business hotspot owners
If you run guest Wi-Fi with a login page or vouchers, remember that an authentication error happens at the Wi-Fi password stage, before the login page appears. Networks with a captive portal are usually left open without a Wi-Fi password, and guests sign in through the login page. If guests often report authentication errors, check whether the guest SSID was accidentally given a password or set to WPA3 only.
Also check the user limit on the access point and any isolation or device blocking settings, because refusals from either can appear as the same message on a guest's phone. If guests are connected but the login page does not show, that is a different problem, covered in the guide to a Wi-Fi login page that does not appear.
In short: an authentication error means the password check failed. Start by forgetting the network and carefully retyping the password, then test another device to decide whether the router is at fault. If it is the router, check the security mode, MAC filtering, and restart it before doing anything more drastic.
Frequently asked questions
What does Authentication error mean when connecting to Wi-Fi?
It means the phone and the router failed the password check. The router did not receive proof that the phone holds the same password, so the connection was stopped before the phone got an IP address.
The password is correct but I still get an authentication error. Why?
Most often: the phone is still using an old profile after the password was changed, the router's security mode does not suit an older phone, or the router is blocking the device through MAC filtering or a device limit. Forget the network and re-enter the password, then check the router settings.
Is resetting network settings on the phone safe?
It is safe, but every saved Wi-Fi network, paired Bluetooth device, and VPN setting is deleted too. That is why it is best kept as the last step, once you are sure the problem really is the phone.
How do I know whether the problem is the router or the phone?
Try connecting another device with the same password. If the other device also fails, the problem is the router or the password. If only one phone fails, check the saved profile, the random MAC address, and security mode support on that phone.